With the rapid development of the economy, the demand for small transformers is increasing, and the demand for Electric Coil Winding Machine has also increased. The requirements are becoming stricter and the operation steps are relatively complicated. The steps are similar, let's take a look!
1. Check it before booting, power on, check the winding machine before booting, make sure no major problems are found, and 5S work.
2. The heat thermal machine, after turning on, needs to do the heat machine operation, but the Toroid Winder With Gear Rack Head enters the normal power and ventilation state. After the normal operation of each part, do the next step.
3. Set the parameters, find the corresponding material specification model according to the recent setting parameters, and set the corresponding parameters in the winding machine.
4. Debug:
After setting the parameters, it does not mean that it can be produced directly; it is necessary to debug to ensure the coordinated operation of each parameter and components of the winding machine, and the product quality of production meets the standard.
5. Small batch production, if it is a transformer model that has not been produced before, you need to perform small -batch trial production to ensure that there are no major problems.
6. Formally production, if there is no small number, it will be put into production in large quantities. At the beginning, engineering and technical staff must arrive to ensure that the operator operates well before operation!
In short, a small transformer winding machine tutorial must be familiar. If friends who buy a small transformer winding machine can directly ask for the winding machine manufacturer, but the actual specific operation still needs to be gradually skilled in the daily operation process, summarize the optimization work!
The above is the relevant content of "Basic operational steps to share the transformer winding machine by the winding machine manufacturer!" For more information such as more circular winding machines, fully automatic stator winding machines, please pay more attention to me!
