Introduction of Our GW-IN200-4 Full Automatic Double Station Internal Winding Machine
Technical requirements for stator winding
Workpiece description
A total of 1 product workpiece stator, respectively: outer diameter × inner diameter × stack height (not including the frame)
120mm×86mm×28mm (The outer diameter is the same, but the stack height can be adjusted.)
For winding requirements, please refer to Party A’s drawings. The dimensions are designed with reference to the samples provided by Party A. (Party B is only responsible for the sample size. If it is involved in a situation that is inconsistent with the sample size, Party B will not bear the corresponding responsibility, but the height can be adjusted. ).
The test after the equipment is wound meets the salt water pinhole test requirements of Party A (3 meters not more than 1 point), and the qualified rate of finished products is 100% within the allowable range of the parameters.
