Precautions for automatic winding machine threading
1. First determine the actual wiring harness specifications, and get the correct list of related materials and configurations.
2. The winding speed of the thin wire can be set faster, but the early acceleration should be small to avoid wire breakage.
3. The winding speed of thick wire needs to be set slowly, but the torque should be sufficient at medium and low speeds.
4. In the process of winding aluminum wire, it should be noted that the tension should be much smaller than the tension of the copper wire of the same size, so as not to stretch the wire, which will reduce the wire diameter, crack the outer paint layer, and cause defective products.
5. When winding aluminum wire, the set wire diameter should be increased due to the decrease of tension. According to the tension, try to reduce the number of threading wheels.
6. For example, self-adhesive thread, enameled cotton thread, etc., should be enlarged when setting the wire diameter, because its appearance is not smooth and has no inertia.
To sum up, the threading steps of the automatic winding machine are basically the same, but the specific operation details will vary depending on the equipment, but the operation must be carried out in accordance with the safe operation rules of the automatic winding machine, and pay attention to the automatic winding machine Note, accumulate daily threading skills to make your work more and more proficient!
