Because the production process of the transformer winding machine determines the requirements of frequent start-up and constant torque of the equipment, the general parameters of the transformer winding machine that need to be set are as follows: the setting of the slow train function is also a commonly used parameter, it mainly controls the slow train start and stop of the equipment, and plays the role of soft start and stop buffer, the correct setting allows the operator to start the winding machine has an adaptive process of tension, when the device stops buffer can be more accurate to stop. The number of turns is the number of turns the equipment needs to run according to the production process. Divided into the total number of turns and the corresponding number of turns per step. What we need to note is that the total number of rounds is equal to the sum of the number of rounds per step. Speed is used to control the speed of the equipment, speed setting needs to be combined with the production process and the actual working conditions of the winding, too fast and too slow is not conducive to the formation of the coil, running too fast will give the operator control, increase the vibration and noise of equipment, low speed will greatly affect the productivity and efficiency of equipment, but also affect the spindle torque output.
