Ring winding machine is the production of ring transformer and ring coil winding machine.
The ring winding machine is composed of a head, a fixture and a frame. Different from the flat winding machine, the same head can only be used for different line diameter and inner diameter products after replacing different specifications of the storage line ring. At the same time, the fixture also has the corresponding clamping range. Usually, the following wearing parts of the ring winding machine need to be replaced frequently:
(1) The wire storage ring, also known as the steel ring (shuttle), is one of the important parts of the machine head, used to complete the wire storage and winding work; Its quality directly affects the service life, indirect cost and quality of products.
(2) The supporting wheel is also known as the regulating wheel. The number of supporting wheels in different heads is different, and its material is directly related to its service life.
(3) The service life of the part is related to the wire diameter, size and material of the winding product.
(4) Belt, side slider and other wearing parts.
The ring winding machine not only produces different products from the flat winding machine, but also increases the consumption cost of the whole life cycle. Once a flat winding machine is purchased, it is usually just a matter of making different tools. After purchasing the ring winding machine, it is necessary to replace different storage ring and supporting wheel according to the wire diameter and size of the product. Because the copper wire is always sliding out from one side of the storage ring (belt type and side slide type), the storage ring has uneven force, and the storage ring and the supporting wheel need to be replaced from time to time to continue production! Of course, the added value of the ring coil is much higher than that of the flat coil, which can bear this cost.
