1. The whole machine reset method
Under normal circumstances, the whole machine error caused by instantaneous failure of the winding machine can be cleared by hardware reset or switching system power supply in turn. If the working storage area of the system is unstable due to voltage, unplugging the circuit board or rectifying switching power supply undervoltage will cause confusion , The system must be initialized and cleared. Before clearing, you should pay attention to the current data backup record. If the fault cannot be eliminated after resetting and initializing, perform hardware replacement diagnosis.
2. Compilation of trial run program method
Compiling a reasonable program and running it successfully is the basis for determining whether the whole system is in good condition. Some winding parameter setting errors may cause system failure or invalid function, and sometimes shutdown due to user program errors. You can use the preparation of a test run program to check and correct the errors of the user program to ensure its normal operation.
Three, make good use of the adjustable parts
The adjustment of adjustable parts such as the winding tension, screen voltage, and the starting position of the cable rack is a simple but effective method in maintenance. By adjusting the adjustable parts, some innocuous faults can be corrected. For example, if a company repairs a winding machine that has been used for many years, the system display screen is dim, and the screen power supply voltage is adjusted to be normal.
Four, spare parts replacement method
In the maintenance of the winding machine, replace the suspected faulty parts with good spare parts. After the maintenance personnel have basically judged the cause of the fault, this method can be used to quickly diagnose the fault range, and the winding machine can be quickly put into normal operation, and then the damaged Parts are returned for repair, which is currently the most commonly used troubleshooting method.






