The NC device of the ring winding machine controls the input, action parameters, compensation operation, position detection and control, display interface, diagnosis and alarm device and other modules according to the control logic of the preset software under the support of the environment hardware. Each module is complementary and related. In the main working mode, the CNC program of the winding machine is input. The input program parameters and user coil parameters, feedback signals of additional devices, position signals, range signals and various kinds of alarm signals affect the operation of the winding machine. Winding the end of the coil to meet customer requirements.
The input forms are register reading, external photoelectric signal input, human-machine interface keyboard input, other additional external interface input.
From the view of the working mode of the winding machine NC system, the program input from the built-in register of the main control board and the coil parameters input from the external keyboard are the main basis for the winding machine to work. The external photoelectric signal is mainly to confirm the position and range, and the movement beyond the position and range is transmitted to the main control board for processing.
For the input program and parameters, some high-grade winding machine control system, but also can carry out invalid parameter correction, the error of serious action is not executed, can automatically check the program. When the control system of winding machine works normally, it is processed step by step according to the built-in program of the system and the parameters input by the user. In the whole winding process, it can monitor the running state of the whole winding machine by detecting the position and range of the moving parts. Once it is in operation, it will stop and alarm immediately due to interference or fault and other errors. Winding machine the combination of CNC system and mechanical parts has always been a delay process, after years of development, the development of intelligent position compensation technology, at the beginning of the unbearable delay has been greatly alleviated, for CNC winding machine automatic winding ultrafine wire, ultra-precision coil laid the foundation.
The display interface is the winding machine and Z end user dialogue window, some users commonly used parameter input and operation, are directly displayed through it, including some winding machine running parameter display, the current state, and such as alarm information will be listed in the display interface, the operator can through the winding machine display to carry out the next action, and confirm some faults. A good quality winding machine, especially to consider the comfort of user operation, simplify user operation steps, reduce the difficulty of the user, to achieve these, need winding mechanism manufacturers continue to optimize its operating system, rich product function and quality, it can be seen that the current domestic winding machine industry development, there is a long way to go.
