How To Adjust The Spindle And Arranging Device Of The Motor Winding Machine

Nov 05, 2021

How to adjust the spindle and arranging device of the motor winding machine



Toroid coil winding machine

Toroidal Transformer Winding Machine   (2)


The main shaft of the motor winding machine refers to the power shaft that provides rotating power and pulls the enameled wire to rotate. The configuration of the main shaft of the winding machine of different specifications is different. The adjustment of the main shaft of the winding machine generally includes the following aspects: output shaft position, concentricity adjustment and additional winding technology. The adjustment of the output shaft position is usually due to the distance between the spindle and the table during winding. The motor winding machine does not meet the requirements of the production process, and each process requires a certain working space. For the adjustment of the output shaft position, attention should be paid to the size of the opening position of the fuselage, and whether the adjustment will affect the normal operation of other parts; concentricity adjustment is common. After the winding machine runs for a period of time, it will affect the concentricity of the winding shaft and the casing. If there is any deviation, it should be maintained and adjusted in time.


In the application process, the motor winding machine has the characteristics of high efficiency and low heat generation. It is very suitable for 24 hours continuous operation of industrial machinery, and industries such as air-conditioning and refrigeration host, fan and water pump, air compressor load and so on. The motor winding machine is a synchronous motor, that is, the magnetic field generated by the stator of the motor winding machine has the same frequency. The structure of the motor winding machine is composed of one-way, two-phase and three-phase. Brushless motors can be divided into trapezoidal motors and sine wave motors according to the drive current of their stator windings.


The motor voltage of products such as automobiles and robots is generally 48V, or even lower than 48V. The adjustment of the arrangement device is generally the adjustment of the arrangement distance and the rotation diameter. The adjustment of the line spacing is because the starting point of the equipment and the winding process do not need to be adjusted. This method is usually the homing sensor of the mobile device. It should be noted that the position movement should not exceed the mechanical origin of the equipment, and a certain margin must be left to ensure that the equipment will not be mechanically collided during the return home. Due to different manufacturers, motor winding machines also have different adjustment methods. Before adjustment, the user should contact the manufacturer to inquire about the adjustment point in time.


Send Inquiry