How to judge the advantages and disadvantages of automatic winding machine equipment.
The automatic winding machine has only made great progress in recent years. In order to meet the requirements of the industry for production capacity and efficiency, the automatic winding machine generally adopts a multi-axis design. For reference, the programmable controller is used as the control core of the equipment, combined with the winding mechanism, pneumatic control components and other accessories to complete the functions of automatic cable arrangement, automatic winding, automatic thread trimming, automatic loading and unloading of skeletons, etc. The production efficiency of this model is higher than that of traditional models. The production method of the machine is much larger, which greatly reduces the labor cost, and requires few steps for manual intervention. Only one person can be equipped for several equipments, and the product yield is high, which is very suitable for high production capacity requirements.
During the winding process of the automatic winding machine, the continuous vibration of the motor will be heard. The frequency is high and the amplitude is small. When the shaft slides, you will hear the "scratch" movement of the guide rail. Occasionally, the air pump releases the gas. It is a normal sound and will not produce a lot of noise. Experienced personnel can distinguish whether the winding machine is abnormal through the moving sound.
Assuming that the screws are not tightened or the screws are not installed in the necessary parts, the vibration generated by the automatic winding machine during the operation may loosen the parts, and in severe cases, collisions will occur, so immediately cut off the power supply of the equipment when you hear the collision sound. , Check the equipment carefully; if the winding machine is not fixed well and fails to reach a certain level, the vibration amplitude of the winding machine will become larger, and there will be larger movements; the bearing has no lubricating oil or the lubricating oil is reduced, and the winding machine bearing room Hear the sound of "hiss, hiss"; the steel ball in the bearing is damaged, and there will be abnormal sounds during operation; the shaft is bent or the bearing is worn, and the winding machine will also produce large amplitude and uneven vibration. Winding machine equipment should be regularly inspected and maintained to stifle the fault in the cradle. If faults and hidden dangers can be found in advance and solved in time, the cost of repair and replacement in the later period is much lower!
