There is a manufacturer of Low frequency transformer winding machine, we will briefly explain the items about transformer winding deformation?
1.local compression and peeling deformation
The local compression and peeling deformation of the transformer winding deformation measuring instrument are considered to be caused by electromagnetic force. Under the action of the repulsive force generated by electricity in the same direction, the two ends of the coil are squeezed by the repulsive force, locally squeezed, and locally Peeling, this kind of deformation will generally not cause the lead when the pin at both ends does not move: that kind of deformation, but only changes the distance between the pie (axial), can pass the current parallel capacitance of the main body in the equivalent circuit ( Capacitance between the cakes) Under the condition that the wire is not subjected to power, the high frequency part of the frequency spectrum changes very little, the entire coil is not compressed, only a part of the distance between the cakes is opened, and a part of the distance between the cakes is compressed.

2.Short circuit between turns
When a metallic turn-to-turn short circuit occurs in the coil, the overall inductance of the coil is significantly reduced, and the coil's obstruction to the signal is greatly reduced. When corresponding to the spectrogram, its low-frequency resonance peak obviously shifts to the high-frequency direction, and the obstruction is reduced at the same time, so the frequency response curve Moving in the direction of decreasing attenuation in the low frequency, the curve rises by more than 2odB; in addition, due to the decrease of the q value, the difference between the resonant peaks and valleys on the spectral curve is reduced, and the spectral curves of the intermediate and high frequencies overlap with the image of the normal coil.
3.the coil is broken
When the coil is broken, the overall inductance of the coil is slightly larger. When corresponding to the spectrogram, the low-frequency resonance peak shifts slightly to the low-frequency direction, and the attenuation of the amplitude hardly changes; the spectral curves of the middle and high frequencies coincide with the spectrogram of the normal coil.
4.metal foreign body
In ordinary coils, if there is a metal foreign body between the cakes, it will have little effect on the total inductance of the low frequency, but the capacity of the cake is increased, the resonance peak of the low frequency part of the spectrum curve shifts to the low frequency direction, and the curve amplitude of the middle and high frequency part increases.
5.wire displacement
When the wire is displaced, since the inductance is not affected, the low frequency of the spectrum curve is completely consistent. Only the curve of 2ookHz~5ookHz changes, mainly due to the change of attenuation amplitude. When the lead moves toward the shell, the high frequency part of the spectrum curve changes to attenuation. When the wire moves in a large direction, the curve drops; when the wire approaches the coil, the high frequency part of the spectral curve moves in the direction of decreasing attenuation, and the curve moves upward.
6.the axial button is bent
Axial twisting means that the coil is squeezed by the electromotive force to both ends, and has to be deformed from the middle when being squeezed by both ends. If the assembly gap of the original transformer is large or the bracket is forced to shift, the coil will be twisted into s in the axial direction. Shape; Because the two ends of this deformation have not changed, part of the capacity between the pie and part of the capacity to ground has changed. Due to the reduction of the capacitance between the panels and the capacitance to ground, the resonance peak generated on the spectral curve is shifted to the high frequency direction. Shift, the resonance peak near the low frequency drops slightly, and the resonance peak frequency near the intermediate frequency rises slightly, and the spectral line of 3ookHz~5ookHz basically maintains the original trend.
If you need low-frequency transformer winding machine, Please contact us!
Grewin Industrial Group Co.,Ltd.
Add:The Fouth Floor A-A3 Zone Aviation
Business Area,DongLi Distrct,Tianjin China.
Web: www.coilwindingmachinechina.com
Mail: admin@coilwindingmachinechina.com
Tel:+86 13072088960






