INTRODUCTION of GWP-08 Semi-auto Eight Spindle Coil Winding Machine
Software Function:
1.The position of the winding frame can be manually adjusted during winding to achieve fine adjustment during winding. This feature requires customization.
2.The system has 1450 slots of data storage space, which can store up to 999 kinds of bobbin parameters. The debugged bobbin parameters can be saved permanently. When replacing the product, just replace the corresponding fixture and select the corresponding bobbin parameters.
3.Sudden power-off during winding, the system saves the final winding state. After power-on again, press the start button to continue winding the unfinished coil.
4.Special features can be customized software.
Product Features:
1.Using 32-bit ARM control chip, Xilinx CPLD, the operation speed is faster, effectively reducing the line error.
2.All input and output are optically isolated, working stably.
3.Full LCD display in English, easy to operate.
4.Intelligent input winding point and winding width.
5.The winding frame is reversing intelligently decelerating to ensure a faster torque at the same time.
6.You can set the spindle accelerating time in controller, change the spindle speed in real time, and overspeed tracking.
7.Saving the winding data automatically when power-down, effectively avoiding coil scrapping caused by sudden power failure.
8.The position of the winding frame can be manually adjusted during the winding process.
9.Intelligently input the starting point and the width of the cable.
Application:
Semi-auto Eight Spindle Coil Winding Machine is the best suited to Electronic transformer coil,Relay coil,High voltage wrapped coil,Shaded pole motor coil,synchronous motor coil,solenoid value coil and inductance coil.
