The main shaft of the motor winding machine is a power shaft which provides rotating power and pulls the enameled wire to rotate. Different specifications of the winding machine spindle configuration is different. The adjustment of the main shaft of the winding machine generally includes the following aspects: the position of the output shaft, the adjustment of the concentricity and the additional winding process.
The adjustment of the output shaft position is usually due to the distance between the spindle and the table during winding. Motor winding machine does not meet the requirements of the production process, each process needs a certain amount of work space. For output shaft position adjustment, attention should be paid to the size of the opening position of the fuselage, and whether the adjustment will affect the normal operation of other parts; concentric adjustment is common. After the winding machine runs for some time, it will affect the concentric degree of the winding shaft and the casing. If any deviation, should be timely maintenance and adjustment.
In the application process, the motor winding machine has the characteristics of high efficiency and low heating. Very suitable for 24-hour continuous operation of industrial machinery, as well as air conditioning refrigeration host, fan pumps, air compressor load and other industries. The motor winding machine is a synchronous motor, that is, the magnetic field produced by the stator of the motor winding machine has the same frequency. The structure of the motor winding machine is composed of one-way, two-phase and three-phase. Brushless motor can be divided into ladder-shaped motor and sine-wave motor according to the driving current of its stator winding.
The motor voltage of automobile, robot and other products is generally 48V, even lower than 48V. The arrangement device's adjustment is the arrangement distance and the rotation diameter adjustment generally. The row spacing is adjusted because there is no need to adjust the starting point of the machine and the winding process.
The method is usually the homing sensor of a mobile device. It should be noted that the position should not be moved beyond the mechanical origin of the equipment, and a certain margin must be left to ensure that the equipment in the process of homing mechanical collision will not occur. Motor winding machines also have different adjustment methods due to different manufacturers. Before the adjustment, the user should contact the manufacturer to inquire the adjustment point in time.
