Automatic Portable Transformer Oil Dielectric Strength Tester (IIJ-II-100)

Our Transformer Parallel Coil Winding Machine, Magnetic Coil Turns Tester, Voal Coil Winding Machine do have good quality and excellent performance, and each of them is strictly inspected. We control the production process with strict quality and improve the production efficiency with scientific management. The implementation of quality certification is an important step for our company to be in line with international standards and go to the world. The company will continue to be guided by the modern corporate philosophy, with the vision of "creating future living space", continue to innovate and surpass, continuously improve product quality, enhance the core competitiveness of the company, and customize its own home for more families. We are employee-oriented, because only employee-oriented can win the future, and employees are the core driving force for enterprise development.

NAME:GW-2100Rcoil turns tester

Specifications

Sensor’s type	Ф9.5 Ф6 Ф4
Winding’s shape	Inner diameter >Ф4mm outer diameter<120mm height<110mm
Winding measurement range	1~30000
Winding measurement accuracy	500~30000 circle ±0.3%
Winding basic measurement speed	1.5 measurements /second
Resistance measurement range	100uΩ-20kΩ
Resistance basic measurement speed	3 times /second
Resistance measurement accuracy	0.2%
Range mode	Auto selection
Display mode	6-digit LED
Alarm selection	Short-circuit ,phase ,quiet
Dimensions (W*H*D)	335×320×290mm
Weight	Approx.6kg
Working temperature & humidity	0℃-40℃,≤90%RH
Power requirement	198-242VAC 47.5-52.5HZ
Power consumption	≤30VA

Ⅰ Summarize

1． Product Brief:

GW2100/GW2100R winding turns test has applied the latest measuring techniques in this field. It has stabilizing performance and good quality. This series of instrument can test various winding turns and shown the DCR value of copper winding resistance (The testing functions only when it is GW2100R). This instrument is applied to test various winding turns such as electric machine, transformer, electric machine winding, and relay coil. The instrument have some characteristics such as intelligent, novel in the appearance, and high test precision, fast speed, widely range and easily to operate. There is no need of calibrating and renewing the range so it will improve the test efficiency greatly.

2． Technical indicators:

2.1 Working environment:

Temperature 0℃～40℃

Humidity ≤90℅RH

Atmospheric pressure 86～104Pa

2.2 Turns testing

2.2.1 The range of turns testing;

1 ring～30000 ring

2.2.2 Measurement error:

The range of winding turns	Measurement error
1～200	±0.1℅±1 Word
201～1000	±0.2℅±1 Word
1001～5000	±0.3℅±2 Word
5001～30000	±0.5℅±6 Word

2.2.3 Turns dimensions:

Inside diameter＞4.5mm， Height＜100mm，Outside diameter＜100mm（The special sizes could be customs made）

2.3 DCR test(Only GW2100R）

2.3.1 Range:

Automatic selecting

2.3.2 Test current:

0.1mA、1mA、10mA、100 mA Four shifting gears automatic selecting

2.3.3 The test range of resistance:

100uΩ～20kΩ

2.3.4 Measurement error:

Resistance range	Measurement error
0．1Ω～0.9999Ω	±0.7℅±2 Word
1Ω～19.99Ω	±0.5℅±1 Word
20Ω～19.99KΩ	±0.3℅±1 Word

2.4 Operating voltage:

220(1±10%) V AC, 50Hz (1±5%)

2.5 External dimensions:

335mm×320mm×290mm

2.6 Weight:

About 6kg

ⅡPanel instructions

1．The front panel drawing（GW2100R）

2．The back panel Drawing

To explain the label on front and back panel as detail as follow:

Label	Name	Functional instruction
The front panel instruction
1	Indicator lamp	turnoff, short indicator
2	Display window	Display turns or the value of resistance test
3	Indicator lamp（GW2100R）	Turns or the resistance unit indication
4	The key-press of parameter （GW2100R）	Select test turns or resistance
5	The key-press of Clear（GW2100R）	The clear for testing resistance short
6	Power switch	Used in on (1)or off(0) instrument import power
7	The key-press of Phase, turnoff, silent	The mode used in select alarm setup
8	The indicator lamp for alarm setup state	To indicate the alarm setup state
9	Test transducer	Be used in measurement the winding turns
10	Tumbler	anti-clockwise Open it to set the measured turns
The back panel description
11	Fuse	Be used in overcurrent protection of instrument, please use the 1A fuse
12	Test port	To connect GW26004A connecting line test turns or DCR outside
13	Communication joint	Be use in leave factor check
14	Power socket	Be use in connect 220V power line
15	Nameplate	To mark the manufacturing company, date and instrument No.etc

Ⅲ Operating instructions

1． Preparation for measuring

When plug power line and testing line, opening the power switch on “1”, and the display and indicator lamp will be on. The display will shown “GW2100” (matches with GW2100) or “GW2100R” (matches with GW2100R) at one minutes later, the display shown“OPEN” (The state of measurement turns) or “-OU-”(The state of measurement resistance) after it flickers for about 15min. In order to test the instrument accurately, it should to be preheating 15min

2． Preferences(Only GW2100R)

To select test content according with actual measurement and the key of “PARA” can be pressed to conversion between turns test and DCR Test.

3. Measuring of turns

3.1 Select method of alarm setup (this selected method only applicable to the testing of turns, when testing the DCR, select this method is invalid);

Selections of message ring correspond respectively with the key” Phase”,” turnoff”, “silent” and matching indicator lamp. If the corresponding set testing happens in measurement, the inside hummer will go on ringing and inform the testers about the respective alarm.

When the phase key is pressed and the corresponding phase light is on, it suggests that the windings tolerate the phase. Interrupted alarm rings when the opposition is -

Press the key” turnoff”, the corresponding indicator lamp on, it is shown that the tested winding is turnoff (open). Otherwise, the interrupted alarm rings when it fails to connect, at the same time the “turnoff” lamp is on at the upper left of the instrument.The display will shown “-OPEN-”in testing open anytime;

Press the key” silent”, the corresponding indicator lamp on, the alarm still rings as it short.

3.2 Measuring of turns:：

To running the tumbler of transducer to propriety location (the corner ≦45^o) in counter-clockwise direction and to set the testing winding into the turns test transducer what is vertical to the instrument plane, then running the tumbler of transducer to close the vertical transducer in clockwise direction and then connect the testing clips and testing winding, the value what the display shown is the practice turns of testing winding value. Repeat above process and test next winding.

6．DCR test (Only GW2100R）

Press the” PARA” key into the state of measurement of resistance, and the display shown—OU—.

6．1 Clear：

The testing clips is short as following drawing, press the “clear” key to clear the base data what it is be applied in measurement resistance.

6.2 Measuring of resistance:

To connect the testing resistance into testing line, the instrument will automatic select span according with the size of resistance value and The LED digital display shown the testing value; select the measurement of resistance after turns testing finished, and can read out the copper resistance of measurement winding. The tested winding will not be set into winding test transducer in measurement of resistance.

Ⅳ Notice

1． Dot not lay the instrument near to the larger field, it will effect the normally test of instrument

2． If the testing winding has short by itself, it will affect precision.

3． The testing winding will be laid in centre of transducer to avoid affecting the test precision of the instrument.

4． Don’t through the test line into transducer; it will affect the results of testing

5． The testing line is wearing parts, if the instrument do not have nicely measure or do not test normality, please check the testing line break off whether or not, bad connection or the other failure.

6． The testing element should put and down lightly, to avoid impacting transducer, the rocker of transducer running should not exceed 45^O and running the rocker of transducer with high power should damage the transducer forever.

7． To protect transducer in transporting and handling the instrument.

PRODUCT:

PACKAGING:

Packaging Material: Carton/Wooden case with foam inside.
1.General package(Paper carton or plastic bag): For small euipped parts for Toroidal Transformer Winding Machine , Package it with form and pack paper to guarantee unbroken during the transport.
2.Wooden case package: For larger scale Toroidal Winding machine ,we have special skilled carpenter, who would make the proper wooden case with exact thickness,density,length. The up arrow ↑marked on the outer wooden case. Buffer material would be put in the wooden case to prevent crack and shock.

FACTORY:

We-GREWIN INDUSTRIAL GROUP is expert in winding machines lines for 28Years. Our Grewin have ISO9001:2015,CE approvals,Machines'Patents,"high-tech enterprises"by the government.

We encourage the sustainable use of resources in our Automatic Portable Transformer Oil Dielectric Strength Tester (IIJ-II-100) and business operations and strive to design products that are environmentally friendly. We will start from the needs of domestic customers and strive to develop high-quality products that meet customer requirements. We actively extend the industrial chain in accordance with the principle of supporting and promoting the development of the main business.

Hot Tags: coil turns tester, China, suppliers, manufacturers, factory, price, made in China, Automatic Toroid Coil Winding Machine, Automatic Toroid Winding Machine, EI Stacking Insert Machine, Semi Auto Voice Coil Winder, Transformer Core Taping Machine, Digital Alternating Winding Machine