Latest Products
Contact Us
- The Fourth Floor, A-A3 Zone, Aviation Business Area, DongLi Distrct, Tianjin, China.
- >salesmanager@coilwinding machinechina.com
- +8613072088960
Hollow Coil Self-adhesive Wire Winding Machine
Model: GWP-01
Number of winding spindles:1
Spindle speed:0-2000 rpm
Adaptable wire diameter: 0. 035- - 1.5 mm can be upgraded
Maximum rotation diameter:320 mm
Description
|
Number of winding spindles |
1 |
Machine power |
2. 15 KW |
|
Spindle speed |
0-2000 rpm |
Machine size |
Length: 900mm Width: 500mm Height: 1500mm |
|
Adaptable wire diameter |
0. 035- - 1.5 mm can be upgraded |
Machine weight |
165 Kg |
|
Maximum rotation diameter |
320 mm |
Winding servo power |
400W |
|
Stroke range |
X: 18 0 Y: 2 00 |
X\Y axis servo power |
200W\200W |
Precision wiring air core self-adhesive wire fully automatic winding machine is an advanced piece of equipment that is designed to simplify the process of winding wires. It is a highly efficient machine that can be used by anyone with minimal skills. Here is a step-by-step guide on how to use the machine:
|
U-axis (rotation) |
400W Mitsubishi servo motor |
Bearing |
Japan NSK |
|
X-axis (left and right) |
200W Mitsubishi servo motor |
Sensor |
Japan Omron |
|
Y Y axis (up and down) |
200W Mitsubishi servo motor |
Pneumatic components |
Airtac or SMC |
|
Control system |
high-precision motion controller |
Spindle cable box |
Thickened box, independently developed |
|
Human-machine interface |
8072IP touch screen |
Work table |
Thickened table, independently developed |
|
Screw guide |
Taiwan Shangyin brand, C-level accuracy |
Mechanical components |
Independent research and development |
|
Timing belt |
Japan Bando |
Bearing |
Bearing: Japan NSK |
Step 1: Prepare the machine
The first step is to ensure that the machine is in good condition. Check the power supply and make sure it is connected. Also, ensure that all the parts of the machine are properly assembled. Before starting the machine, make sure that the wires to be wound are readily available.
Step 2: Place the wire on the machine
The next step is to place the wire to be wound on the machine. Make sure that the wire is placed correctly and that it is firmly held in place. This will prevent the wire from moving during the winding process.
Step 3: Set the machine
Once the wire is in place, set the machine according to your specifications. This includes setting the winding speed, the number of turns, the type of winding, and other parameters that are required for your specific project.
Step 4: Start the machine
After setting the machine, start it to begin the winding process. As the machine begins to wind the wire, monitor it to ensure that everything is running smoothly. If there is any issue, stop the machine and make the necessary adjustments.
Step 5: Finish the winding
After the machine has completed the winding process, cut the wire and remove it from the machine. Use pliers to remove any excess wire and tidy up the ends to ensure that they are smooth and even.
In conclusion, using the Precision wiring air core self-adhesive wire fully automatic winding machine is not difficult. By following the above steps and ensuring that the machine is properly set up and maintained, you can achieve precise and efficient winding results. So, get started today and take advantage of this fantastic piece of equipment.
Hot Tags: hollow coil self-adhesive wire winding machine, China, suppliers, manufacturers, factory, price, made in China, Rectangular Taping Machine, CNC Coil Winder, Multi Spindle Coil Winding Machine, Smaller Toroid Coil Winding Machine, Digital Toroid Controller Winding Machine, Big Coil Automatic Winding Machine
You Might Also Like
