Products

Four-axis Spindle Winding Machine

Spindles:4
Wire diameter:0.04-0.6mm
Spread Pitch:0-9.999mm
Wire distance:100mm（Max）
Wire speed:0-30mm/s
Main Motor:550W three-phase AC motor +750w frequency converter

Send Inquiry

Description

Name: Four-axis spindle winding machine(GWP9-04)

SPECIFICATION:

Spindles	4	Spread Motor	Two Phase hybrid stepping motor, static torque 2N.M
Wire diameter	0.04-0.6mm	Max Speed	6000rpm
Spread Pitch	0-9.999mm	Memory	999 Sequences
Wire distance	100mm（Max）	Power Source	Single-Phase 220V±10%,50HZ
Wire speed	0-30mm/s	Rotation diameter	0-80mm
Main Motor	550W three-phase AC motor +750w frequency converter	Power	700W

Software function:

Bobbin basic parameter:

input. Starting point, width, spacing, winding circle number, start, stop, spindle positioning, spindle low speed, spindle high speed,spindle direction, wire arrangement direction, floor stop.

Spindle climbing time setting, special winding function selection .

1. During winding, the position of the wire device can be manually adjusted to realize fine adjustment during precise wiring. This function needs to be customized by users.

2. The system has 1450 sections of data storage space, which can store up to 999 skeleton parameters. The adjusted skeleton parameters can be permanently saved. When replacing products, just replace the corresponding fixture and select the corresponding bobbin parameters.

3. While the power is cut off suddenly during winding, the system will saves the last winding state. When get power again, press the start key, it will continue to wind the unfinished coil.

4. Software can be customized for special functions.

Product Features:

Input and output are all photoelectrically isolated and work stably.

Chinese LCD display, simple and convenient to operate.

Intelligently input the starting point and the wire width.

The winding displacement and reverse can decelerate intelligently, which can ensure faster winding displacement and greater torque at the same time.

The spindle climbing time can be set, the spindle speed can be changed in real time, and over speed tracking can be carried out.

Save the winding data in the situation of power failure, so as to effectively avoid the scrapping of coils The position of the cable rack can be adjusted manually during the winding process.

The bearing belt (which is imported from Japan), Taiwan ball screw and cast iron box are used to ensure stable performance.

Scope of Application

1. Ordinary transformer

2. High frequency transformer

3. Solenoid valve coil

4. Multi-tap coil

5. Layer wrapped tape coil

6. The coils of precision parallel winding machine

7. Coils with larger diameter

coil winding machine (3)_